Blog

> ATi Catalyst™ 소프트웨어 꾸러미 7.12는 다음을 포함합니다 :

• Radeon™ display driver 8.442
• Multimedia Center™ 9.16 (Windows XP only)
• HydraVision™ (Windows XP only)
• HydraVision™ Basic Edition (Windows XP only)
• Remote Wonder 3.04 (Windows XP only)
• WDM Driver Install Bundle
• Southbridge/IXP Driver
• Catalyst™ Control Center Version 7.12

!! Catalyst™ 소프트웨어 드라이버와 Catalyst Control Center™는 서로 독립적으로 다운로드 할 수 있습니다. 하지만 최상의 안정성과 성능을 위해서 AMD는 두 컴포넌트의 동일한 Catalyst™ 릴리즈로 부터의 업데이트를 권장합니다.

!! Catalyst™ Control Center는 Microsoft .NET Framework 버전 2.0이 설치되어 있어야 함을 요구합니다. .NET 2.0이 설치되지 않은 상태에서 Catalyst™ Control Center는 정상적으로 작동하지 않으며 사용자는 에러 메시지를 보게 될 것입니다.

! 이 릴리즈 노트는 Radeon™  디스플레이 드라이버에 대한 정보만을 제공합니다. ATI Multimedia Center™, HydraVision™, HydraVision Basic Edition, WDM, Remote Wonder™ 또는 Southbridge/IXP driver에 대한 정보는 다음의 장소에서 각각의 릴리즈 노트를 참조하시기 바랍니다.: https://support.ati.com/
> AMD 제품 지원

다음의 ATI Radeon™ 제품에 대해 32bit와 64bit 버전의 Microsoft Windows Vista 운영체제 모두를 지원하는 Catalyst™ Vista 드라이버를 제공합니다.

! ATI All-in-Wonder™ 보드는 Windows Vista 운영 체제에서 AMD의 Windows Vista ready 디스플레이 그리고 캡쳐 드라이버와 함께 동작 합니다. Windows Vista Media Center 어플리케이션은 TV/캡쳐 기능을 지원하지 않지만 ATI All-in-Wonder™ TV/캡쳐 기능은 Windows Vista를 위한 SnapStream의 BeyondTV 4.6이 적합한 기능을 지원합니다. 다른 써드파티 솔루션(Arcsoft의 Total Media 3와 같은)은 아마도 ATI All-in-Wonder™의 TV/캡쳐 기능을 지원 하겠지만 AMD를 통해 완전히 테스트 되진 않았습니다.

> 지원되는 운영 체제들

• Windows Vista (32 and 64 bit versions)
• Windows XP Professional
• Windows XP Home Edition
• Windows XP Media Center Edition
• Windows XP Professional x64 Edition

! Catalyst™ Vista 드라이버를 Windows Vista에 설치할 때 Catalyst™ Vista 드라이버의 설치를 성공적으로 완료하기 위해서는 반드시 관리자 또는 관리자의 권한을 갖는 사용자 계정으로 접속해야 합니다.

!! Vista 운영체제(32 bit 와 64 bit)에서 드라이버를 설치를 완료했을때 아마도 한번은 드라이버 로그 파일이 ATI T200 Unified AVStream Driver가 설치에 실패했다고 알릴 겁니다. 시스템을 재부팅해서 문제를 하결하십시오.

> 새로운 기능들

• Avivo™ 업데이트
• ATI Radeon™HD 2900 시리즈를 위한 강화된 ATI Overdrive 지원

Avivo™ 업데이트

Catalyst™ 7.12는 Avivo™ 업데이트를 제공합니다. 업데이트는 ATI Catalyst™ Control Center가 시스템에 설치된 그래픽카드에 따라 드라이버가 무엇을 지원하는지 반영하며 드라이버를 통해 지원되지 않는 어떠한 비디오 기능들도 드러나지 않도록 합니다. DirectX Video Acceleration (DXVA) 드라이버는 Catalyst™ Control Center와 DXVA 컴포넌트 사이에 정의된 인터페이스를 통해 그래픽 기능에 대한 질의와 Catalyst™ Control Center측면에서의 기능들에 대한 질의를 통한 정보 수집 메커니즘을 수행할 것 입니다. 이 기능은 ATI Radeon™ 9500 시리즈 제품들과 그 이상의 제품에 대해 지원될 것 입니다.

ATI Radeon™HD 2900 시리즈를 위한 강화된 ATI Overdrive 지원

이 번 릴리즈의 Catalyst™는 ATI Radeon™ HD 2900 시리즈를 위한 강화된 버전의 ATI OverDrive™를 제공합니다. 사용자는 이제 CrossFire™ 모드 상에서 GPU 엔진과 그래픽 메모리 클럭 속도 모두를 오버클럭 할 수 있습니다(그리고 단일 ATI Radeon™ 그래픽 가속기의 오버클럭또한 잘 작동합니다). 이번 버전의 ATI Overdrive 또한 마찬가지 입니다.

> 성능 향상

Catalyst™ 7.12는 다음과 같은 성능 향상이 알려져 있습니다:

• ATI Radeon™ HD 2400  또는 ATI Radeon™ HD 2600 시리즈의 제품들을 포함한 시스템 모두에서 3DMark2005의 성능향상이 5% 또는 그이상 있으며 Anti-aliasing 그리고 Anisotropic Filtering의 비활성시 최대의 이득을 보이는 것으로 알려져있습니다.
• ATI Radeon™ HD38x0 시리즈의 제품을 포함한 시스템에서 Company of Heroes DX10의 최대 5%의 성능 향상이 있습니다.

> ATi의 Folding@Home

Folding@Home 은 스탠포드 대학이 디자인한 분산 컴퓨팅 프로젝트 입니다. 어플리케이션은 단백질 폴딩의 강력한 시뮬레이션을 수행합니다. 이 시뮬레이션은 연구원들이 정확한 발병의 원인을 밝히는데 도움을 줍니다. Folding@Home의 단백질 폴딩 시뮬레이션은 작업 부하를 작은 작업 단위들로 쪼개고 인터넷 넘어의 수백만대의 컴퓨터에 분산시키는 분산 컴퓨팅을 사용합니다. 당신은 수많은 질병들의 치료법을 찾는데 도움을 줄 수 있습니다! 다음 순서에 따라 Folding@Home에 동참 하십시오:

• ATi의 Catalyst™ 소프트웨어 꾸러미를 받습니다.
• Folding@Home GPU 클라이언트 어플리케이션을 받습니다.
  ! ATI Radeon™ X1600, X1800 또는 X1900 시리즈의 제품을 가지고 있다면 CPU “Graphical client”와 혼동하지 마시고 GPU 클라이언트(콘솔 또는 GUI 버전의)를 받으십시오. 앞서 리스트의 ATI Radeon™ 제품을 가지고 있지 않다면 CPU 클라이언트를 받으십시오.
• ATi 팀 번호 51394를 입력하시고 폴딩을 시작하십시오!

Folding@Home에 대해 좀더 많은 정보를 원하시면 다음의 사이트를 방문하시기 바랍니다: http://ati.amd.com/technology/streamcomputing/folding.html

Resolved Issues for the Windows Vista Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows Vista. These include:

• Call of Duty: Enabling Super AA and CrossFire™ no longer results in the game failing to respond when the player dies. Further details can be found in topic number 737-31110
• Combat Mission: Shock Force Demo v1.02: Setting the ATI left-click compatibility option to off and starting a new battle no longer results in the game failing to respond when clicking the left mouse button on various options within the game. Further details can be found in topic number 737-30492
• Crysis: Momentary corruption is no longer noticed when playing the game. Further details can be found in topic number 737-31094
• Crysis: The ice level is no longer too bright which was making the game nonplayable. Further details can be found in topic number 737-31104
• Dark Messiah, Might and Magic, or Sin Episodes: Too much fog or incorrect fog no longer occurs during game play. This issue was known to occur on systems containing an ATI Radeon™ HD 2×00 series of product. Further details can be found in topic number 737-31101
• El Matador: Shadow corruption is no longer noticed throughout the game. Further details can be found in topic number 737-31099
• Enemy Territory: Quake Wars: Enabling Super AA and soft particles no longer results in corruption being noticed in the main menu and through-out game play. Further details can be found in topic number 737-29942
• FEAR: The slow motion visual effects is now functioning. Further details can be found in topic number 737-31100
• FlightSim X: Playing the game on a system running Windows Vista and containing an ATI Radeon™ HD 2900 series of product no longer results in the shadows being incorrect or failing to appear. Further details can be found in topic number 737-31095
• Google Sketchupno longer fails to pan when AA is enabled on systems containing an ATI Radeon™ X1300/1550/1600 series of product. Further details can be found in topic number 737-30496
• GTA San Andreas: Enabling AA within the game and within the Catalyst™ Control Center no longer results in the game failing to start. Further details can be found in topic number 737-31108
• GTA: San Andreas: Enabling high quality settings within the game no longer results in Vsync loss, no video, or artifact corruption. Further details can be found in topic number 737-31102
• Hellgate: MSAA is now working with the DX10 version of the game. Further details can be found in topic number 737-31105
• Hellgate: Screen flashing or the game failing no longer occurs when attempting to start a multiplayer game on a system running Windows Vista and containing an ATI Radeon™ HD 2600 series of product. Further details can be found in topic number 737-31106
• Infernal: the game no longer fails when attempting to launch a new game. Further details can be found in topic number 737-31096
• Lord of the Rings Return of the King: The game background no longer flashes when CrossFire is enabled. Further details can be found in topic number 737-31098
• Lost Planet: Setting the in-game options to maximum along with AA ste to 2x and AF set to 16x no longer results in corruption being noticed when CrossFiore is enabled. Further details can be found in topic number 737-31090
• Quake 4: Enabling CrossFire™ and setting the in game options to 1600×1200 and AA to 4x no longer results in corruption being noticed. Further details can be found in topic number 737-31109
• The Sims 2: Flickering and corruption are no longer noticed in certain areas of the game. Further details can be found in topic number 737-31097
• World in Conflict: Setting the in-game AA option to 4x and running the benchmark no longer results in flickering being noticed. Further details can be found in topic number 737-31107
• When running certain OpenGL samples, the ATI Radeon™ graphics adapter now runs at the requested clock values on a CrossFire™ configured system. Further details can be found in topic number 737-28824
• Catalyst™ Control Center: German character are no longer truncated in the ProfileManager Applications tab. Further details can be found in topic number 737-29930
• Connecting a secondary display device to a system containing an ATI Radeon™ x1200/1250/1270 series of product and enabling clone mode or extended desktop mode no longer results in horizontal line corruption being noticed when using a high refresh rate and display resolution. Further details can be found in topic number 737-29933
• Connecting a secondary display device no longer results in the Anisotropic Filtering option being missing for second adapter until the system is rebooted. Further details can be found in topic number 737-30568
• Connecting a secondary display device to a system containing an ATI Radeon™ x1200/1250/1270 series of product and enabling clone mode or extended desktop mode no longer results in horizontal line corruption being noticed when using a high refresh rate and display resolution. Further details can be found in topic number 737-30572
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250 series of product. Further details can be found in topic number 737-30577
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed on the lower portion of the playback window. Further details can be found in topic number 737-30581
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption or the Windows Vista operating system failing to respond after a short period of playback time. Further details can be found in topic number 737-30585
• Enabling extended desktop mode and dragging the media player window between the desktops no longer results in the playback stopping. Further details can be found in topic number 737-30586
• Setting the frame buffer size to 256mb in the CMOS setup no longer results in the ATI graphics driver failing to be installed. Further details can be found in topic number 737-31089
• The display no longer become white when resuming from an S4 state. Further details can be found in topic number 737-31091
• The display no longer becomes white for several seconds before entering hibernation mode. Further details can be found in topic number 737-31092
• Setting the display device to 1600×1200 75Hz no longer results in the HD DVD playback window appearing blank. Further details can be found in topic number 737-29936
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250 series of product. Further details can be found in topic number 737-30577
• A black screen is no longer displayed at the DVD menu when using WinDVD8 to play a DVD title with DXVA enabled. Further details can be found in topic number 737-30488
• Rotating the display device when playing a DVD using the WinDVD player no longer results in the display going blank. Further details can be found in topic number 737-31093
• Connecting a display device via Component Video as the primary display device and a DFP as a secondary display device no longer results in extended desktop mode failing to be applied. Further details can be found in topic number 737-30494
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed on the lower portion of the playback window. Further details can be found in topic number 737-30581
• Disabling CrossFire™ no longer results in a secondary display device being out of range on the secondary ASIC. Further details can be found in topic number 737-31103
• Installing two Radeon™ HD 2400 series of products into one system no longer results in the AA filter box failing to become greyed out when enabling CrossFire™ and setting AA to 8x. Further details can be found in topic number 737-31111
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption or the Windows Vista operating system failing to respond after a short period of playback time. Further details can be found in topic number 737-30585
• Setting the display resolution to either 1776×1024 or 1920×1024 30i no longer results in the display devices failing to resume from an S3 state. Further details can be found in topic number 737-29944
• The Cyberlink player no longer fails after playing interlaced VC1 video for a short period of time. Further details can be found in topic number 737-31112
• Dithering is no longer noticed with MPEG2 playback. Further details can be found in topic number 737-31113
• Enabling extended desktop mode and dragging the media player window between the desktops no longer results in the playback stopping. Further details can be found in topic number 737-30586

Resolved Issues for the Windows XP Operating System

This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows XP. These include:

• Call of Juarez: Enabling Super AA and CrossFire™ no longer results in corruption being noticed when playing the game. Further details can be found in topic number 737-30592
• DIRT: Launching DIRT with CrossFire™ enabled no longer results in the application failing to launch and an error message being displayed. Further details can be found in topic number 737-29554
• Enemy Territory Quake Wars: Flickering is no longer noticed when SuperAA is enabled. Further details can be found in topic number 737-31136
• Enemy Territory Quake Wars: Setting the in-game options to 2560×1600 and soft particles, along with AA to 8x in the Catalyst™ Control Center no longer results in corruption being noticed. Further details can be found in topic number 737-31135
• Globe 2.1: Corruption is no longer noticed during the introduction video when CrossFire™ is enabled. Further details can be found in topic number 737-31140
• Loki demo: Launching the demo no longer results in the introduction movie failing to display. Further details can be found in topic number 737-31117
• STALKER: Flickering is no longer noticed when playing the game with AA set to 4x and full dynamic lighting is enabled. Further details can be found in topic number 737-30593
• STALKER: The operating system no longer fails when attempting to play the game with CrossFire™ enabled and all in-game options set to maximum. Further details can be found in topic number 737-31131
• HD Audio is now working when setting the desktop resolution to 640×480@60Hz under the Windows XP operating system. Further details can be found in topic number 737-30588
• Enabling CrossFire™ and entering hibernation mode no longer results in the Windows XP operating system failing when attempting to resume from hibernation mode. Further details can be found in topic number 737-30590
• Hot un-plugging the DFP display device when clone mode is enable no longer results in the DFP display device still appearing in the Catalyst™ Control Center. Further details can be found in topic number 737-31114
• HD-DVD content is no longer blocked over native HDMI when using the cyberlink player. Further details can be found in topic number 737-30596
• Connecting an HDMI display device as the secondary display no longer results in extended desktop mode failing when attempting to apply it. Further details can be found in topic number 737-30589
• Entering hibernation mode under Windows XP no longer results in the operating system hanging when attempting to resume from hibernation mode. Further details can be found in topic number 737-31115
• CrossFire™ no longer fails to become disabled when hot unplugging the display device from the interlink dongle. Further details can be found in topic number 737-31116
• Connecting a Dell 30″ LDC display device to an ATI Radeon™ HD 2600 series of product no longer results in flashing or no display image. Further details can be found in topic number 737-30545
• The 2D and 3D gamma no longer appears different when using the gamma calibration tool. Further details can be found in topic number 737-29945
• Playing the online game TianLongBaBu for an extended period of time (2 hours or more) on a system containing an ATI Radeon™ HD2400 or HD2600 no longer results in the operating system failing to respond. Further details can be found in topic number 737-30542
• Rotating the display device and running a directX9 sample in full-screen mode no longer results in corruption being noticed. Further details can be found in topic number 737-31118
• Disabling CrossFire™ no longer results in the Windows XP operating system rebooting. Further details can be found in topic number 737-31132
• Connecting a single display device to a secondary graphics adapter no longer results in extended desktop mode being applied. Further details can be found in topic number 737-30538
• Disconnecting display device no longer results in the ability to enable the dis-connected display device within the Catalyst™ Control Center in a CrossFire™ configured system. Further details can be found in topic number 737-31133
• Connecting a TV as the primary display device and setting the signal format to any PAL mode no longer results in corruption being noticed on the secondary display device when playing a media file using WinAmp or WinDVD. Further details can be found in topic number 737-31134
• The Enable ATI Overdrive clocks for 3D applications only checkbox is now checked and grayed out when the OverDrive option in the Catalyst™ Control Center is unlocked. Further details can be found in topic number 737-30600
• Corruption is no longer noticed when enabling Theater mode and enabling clone mode. Further details can be found in topic number 737-30546
• Dragging the WinDVD player from the primary display to the secondary display no longer results in the player failing to respond. Further, closing the WinDVD player using the Task Manager may result in the operating system failing to respond. Further details can be found in topic number 737-29955
• With some h.264 titles that have MPEG2 intros, playback no longer switches from hardware accelerated to software once the introductory content is finished. Further details can be found in topic number 737-28517
• On certain products, dragging player window from primary to secondary display no longer results in hardware acceleration being disabled which resulted in the CPU usage increasing. Further details can be found in topic number 737-28516
• DXVA is now in use when play H264/VC1 HD content on systems containing an ATI Radeon™ HD 2600 series of product. Further details can be found in topic number 737-31137
• Enabling tiling on the secondary display device when Overlay Theater Mode is enable no longer result in corruption being noticed. Further details can be found in topic number 737-31138
• Corruption is no longer noticed on the secondary display device when Overlay Theater Mode is enabled. Further details can be found in topic number 737-31139
• Enabling clone mode no longer results in corruption being noticed on both display devices when Overlay Theater mode is enabled and the 3D screen saver becomes active. Further details can be found in topic number 737-31141

Resolved Issues for the Windows XP Professional x64 Edition

This section provides information on resolved issues in this release of the ATI Catalyst™ Software Suite for Windows XP Professional x64 Edition operating system. These include

• Prey: Corruption is no longer noticed when a player’s face is two toned. Further details can be found in topic number 737-31142
• Catalyst™ Control Center->OverDrive: The Windows XP Professional x64 Edition operating system no longer fails to resume from sleep mode when the ATI OverDrive page is active. Further details can be found in topic number 737-31143

Known Issues Under the Windows Vista Operating System

This section provides information on known issues associated with the ATI Catalyst™. These include:

• City of Heroes: Attempting to play the game on a system with a dual link panel connected to it may result in the Windows Vista operating system failing to respond. Further details can be found in topic number 737-28495
• Half-Life 2: Episode 2: Playing the game on a system containing an ATI Radeon™ HD 3800 series of product no longer results in the game failing to the desktop when CrossFire™ is enabled. Further details can be found in topic number 737-30753
• Lost Planet: Setting AA to either 4x or 8x may result in the game failing to respond. Further details can be found in topic number 737-28492
• Oblivion: Flickering may be noticed when first making a move if the in-game settings are set to maximum, CrossFire™ is enabled and AF is set to 16x. Further details can be found in topic number 737-31152
• Oblivion: The game may fail or display corruption may be noticed when the game is minimized to desktop and then restored. Further details can be found in topic number 737-31151
• Unreal Tournament 3: The game may intermittently fail to launch when a map has texture detail set to maximum. Further details can be found in topic number 737-31189
• World In Conflict: The game may fail to the Windows desktop when the display resolution is set to 1280×768 and AF is set to 16x. Further details can be found in topic number 737-30752
• Resuming from an S3 state may result in a longer than expected time for the Windows Vista operating system to resume. Further details can be found in topic number 737-25798
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not retained for individual accounts. Further details can be found in topic number 737-25805
• The Record function currently fails to work when using an ATI All-In-Wonder™ X1300 and time shifting is enabled. Further information can be found in topic number 737-22014
• A green or black screen may be displayed when configuring MCE to ATSC mode. Further details can be found in topic number 737-27622
• The 3D aspect may appear blank when launching a second instance of the Catalyst™ Control Center™. This issue may also be experienced under the Windows XP operating system. Further details can be found in topic number 737-28482
• The Catalyst™ Control Center version number may fail to be updated after the installation of a newer Catalyst™ Control Center. Further details can be found in topic number 737-28493
• Dragging player window to secondary display while playing back HD content and moving it back to primary may result in blank player window. Further details can be found in topic number 737-28496
• Connecting a secondary display device and enabling CrossFire™, followed by disabling CrossFire™ no longer results in CrossFire™ pages in the Catalyst™ Control Center showing that it is enabled. Further information on this issue may be found in topic number 737-28845
• The Catalyst™ Control Center version number may fail to be updated after the installation of a newer Catalyst™ Control Center. Further details can be found in topic number 737-28493
• Performing an express install of the Catalyst™ Control Center may result in an error message being displayed when rebooting the system. Further details can be found in topic number 737-29532
• A black window may be displayed when attempting to play a DVD title using WinDVD 7 when Overlay Theater Mode and clone mode is enabled. Further details can be found in topic number 737-29539
• Enabling extended desktop mode and setting the display resolution to 1280×800 or higher, followed by playing an HD-DVD using PowerDVD, may results in the HD-DVD title failing to play. Further details can be found in topic number 737-29547
• Creating a secondary user account and switching from the secondary user account to the primary user account may result in CrossFire™ failing to be enabled. Further details can be found in topic number 737-28786
• The color depth may change to 8 bpp when enabling or disabling CrossFire™ for the first time. Further details can be found in topic number 737-29940
• The Catalyst™ Control Center version number may fail to be updated after the installation of a newer Catalyst™ Control Center. Further details can be found in topic number 737-28493
• Frame flipping may occur while playing certain VC-1 content titles. Further details can be found in topic number 737-27804
• Rebooting the operating system after changing the skin to any available option other than system skin may result in the Catalyst™ Control Center menu options no longer being visible. Further details can be found in topic number 737-30569
• The Catalyst™ Control Center menu option may fail to function when changing the skin from system skin to any other available skin. Further details can be found in topic number 737-30570
• Installing the WDM driver on systems containing an ATI TV Tuner product and an ATI graphics adapter may result in the WDM driver failing to install. Further details can be found in topic number 737-30571
• Connecting a secondary display device using the HDMI connector and enabling either clone mode or extended desktop mode may result in the WinDVD 7 player playing in a windowed mode on both display devices when Overlay Theater Mode is enabled. Further details can be found in topic number 737-30579
• The color depth may change to 8 bpp when enabling or disabling CrossFire™ for the first time. Further details can be found in topic number 737-30583
• The Windows Vista operating system may fail to respond when running the Auto-tune utility found in the Catalyst™ Control Center OverDrive™ option. Further details can be found in topic number 737-30584
• Connecting a secondary display device to a system containing an ATI Radeon™ x1200/1250/1270 series of product and enabling clone mode or extended desktop mode may result in horizontal line corruption being noticed when using a high refresh rate and display resolution. Further details can be found in topic number 737-31144
• Using the hot-key function to switch between various display scenarios may result in the HDMI display device displaying a blank screen. Further details can be found in topic number 737-31145
• The secondary HDMI Display may turn off when resuming from an S1 hibernation with an HDMI display connected. Further details can be found in topic number 737-31146
• Connecting a secondary display device using the HDMI connector and enabling either clone mode or extended desktop mode may result in the WinDVD 7 player playing in a windowed mode on both display devices when Overlay Theater Mode is enabled. Further details can be found in topic number 737-30579
• Resuming from hibernation mode with HDMI display connected may result in a black screen with only a mouse cursor being displayed. Further details can be found in topic number 737-31149
• Setting the desktop resolution to 1600×1200 or greater may result in green pixel corruption being noticed when playing certain games. This issue maybe noticed when using a system running Windows Vista and containing an ATI Radeon™ HD 2600 or HD 2400 series of product. Further details can be found in topic number 737-31150
• The color depth may change to 8 bpp when enabling or disabling CrossFire™ for the first time. Further details can be found in topic number 737-30583
• Enabling extended desktop mode and setting the display resolution to 1280×800 or higher, followed by playing an HD-DVD using PowerDVD, may results in the HD-DVD title failing to play. Further details can be found in topic number 737-29547
• Dragging the player window to a secondary display while playing back HD content and moving it back to primary may result in blank player window. Further details can be found in topic number 737-28496
• Frame flipping may occur while playing certain VC-1 content titles. Further details can be found in topic number 737-27804
• Attempting to play the HD-DVD title Harsh Verdana, School for Scoundrels using the Cyberlink player may result in block corruption being noticed. Further details can be found in topic number 737-31155
• Connecting a secondary display device and enabling clone mode may result in the inability of changing the display configuration when resuming from an S4 state. Further details can be found in topic number 737-31157
• The OverDrive page may be grayed out and the GPU and memory clocks as may be displayed as 000 after enabling CrossFire™ on systems containing and ATI Radeon™ X1900 CrossFire™ Edition and running Windows Vista (64 bit version). Further details can be found in topic number 737-31161
• Enabling CrossFire™ on a system containing an ATI Radeon™ X1900 CrossFire™ Edition product may result in the Windows Vista (64 bit version) failing. Further details can be found in topic number 737-31163
• Connecting an HDMI display device as the primary and setting the display resolution to 1280×1024 may result in an error message when attempting to personalize the display settings. Further details can be found in topic number 737-31165

Known Issues Under the Windows XP Operating System

The following section provides a summary of open issues in the latest version of Catalyst™. These include:

• Call of Juarez: Setting the game level with Optimal Quality and high in-game settings may result in the game level being blank. Further details can be found in topic number 737-30591
• City of Heroes: A fatal error message may be displayed when exiting the game and attempting to launch the Catalyst™ Control Center™ in Advanced mode. Further details can be found in topic number 737-28514
• Enemy Territory: Quake Wars may have corruption on the water and sky after increasing the game resolution. Restarting the game at that higher resolution or issuing reloadImages command in the game console corrects the corruption. This issue only impacts graphics cards up to the ATI Radeon™ X850. Further details can be found in topic number 737-29947
• Lost Planet: Setting AA to either 4x or 8x may intermittently result in the game failing to respond. Further details can be found in topic number 737-28492
• Star Wars Battlefront 2: Setting the in-game options as follows: Overall Quality to High, View Distance to 99, LOD Distance to 99 and Anti-Aliasing to 6x may result in the game’s loading bar reaching the end but the game failing to start. Further details can be found in topic number 737-29946
• Enabling CrossFire™ may result in display corruption being noticed when playing a DVD or media clip using either WinDVD 7, Windows Media Player or PowerDVD 6. Further details can be found in topic number 737-22806
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not retained for individual accounts. This issue may also be experienced under the Windows Vista operating system. Further details can be found in topic number 737-25805
• Connecting two display devices to an ATI Radeon™ X1600 series product may result in the device manager failing to detect the secondary display device. Further information may be found in topic number 737-21266
• Installing the HDMI audio driver and the VIA audio chipset driver may results in a compatibility issue being noticed and a yellow exclamation mark showing up in the Sound, Video and Game Controllers. Further details can be found in topic number 737-28833
• Installing the Catalyst™ Control Center on a previously installed version may results in a warning message that the setup is installing over an earlier version, and that the previous version needs to be uninstalled before installing a more current version, resulting in the Catalyst™ Control Center failing to be installed. Further details can be found in topic number 737-28513
• Performing a fast user switch when running overfly.exe in Overlay Theater Mode may result in overfly.exe failing when switching back. Further details can be found in topic number 737-29951
• Catalyst™ Control Center: Configuring a system with multi-adapters may result in an error message being displayed when running the Test Custom Clocks. Further details can be found in topic number 737-29953
• Connecting a CRT display device as the secondary display and playing a Blu-ray DVD using a Cyberlink player may result in no video playback if extended desktop mode is enabled. Further details can be found in topic number 737-30587
• Connecting a Dual Link Panel to the on-board DVI port, followed by hot plugging a DVI display to the add-on DVI card may result in clone mode becoming disabled when rebooting the machine and the secondary display device remaining blank. Further details can be found in topic number 737-31166
• The movement of pictures may not appear smooth under Excel (Office2007) when the color depth is set to 16bpp. Further details can be found in topic number 737-31167
• The Catalyst Control Center menu option may fail to function when changing the skin from system skin to any other available skin. Further details can be found in topic number 737-30570
• The 3D aspect may appear blank when launching a second instance of the Catalyst™ Control Center. Further details can be found in topic number 737-28482
• Performing an express install of the Catalyst™ Control Center may result in an error message being displayed when rebooting the system. Further details can be found in topic number 737-29532
• The AVIVO TV controls are not available under the Windows Media Center Edition operating system. Further details can be found in topic number 737-31170
• Setting the display resolution to 1440×900 or lower may result in corruption being noticed when playing a DVD title. Further details can be found in topic number 737-31168
• The scaling function may fail under certain resolutions in the Catalyst™ Control Center. Further details can be found in topic number 737-31169
• Setting the desktop resolution to 1280×1024 and using PowerDVD to play an HD-DVD or Blu-ray title may result in corruption being noticed when using an ATI Radeon™ HD 2400 series of product. Further details can be found in topic number 737-31171
• On certain products, changing display resolution while playing back High Definition content may results in instability. It is recommended to set appropriate resolution while playback is stopped. Further details can be found in topic number 737-31172
• Cyberlink: Playing a DVD title on a system containing an ATI Radeon™ HD 2400 series may result in corruption being noticed. Further details can be found in topic number 737-31173
• Connecting a CRT display device as the secondary display and playing a Blu-ray DVD using a Cyberlink player may result in no video playback if extended desktop mode is enabled. Further details can be found in topic number 737-30587
• The floppy drive may fail to read or write under Vista on Dell XPS410 system. Further details can be found in topic number 737-31148

Known Issues Under the Windows XP Professional x64 Edition

The following section provides a summary of open issues in the latest version of Catalyst™. These include:

• FAR CRY: Playing the game on a system running either the Windows XP Professional x64 Edition or Windows XP operating system may result in corruption being noticed when using an ATI Radeon™ Xpress 1200 series of products. Further information can be found in topic number 737-23452
• Running an OpenGL application and attempting to rotate the desktop may result in corruption being noticed. Further details can be found in topic number 737-29556
• The Record function currently fails to work when using an ATI All-In-Wonder™ X1300 and time shifting is enabled. Further information can be found in topic number 737-22014
• Running an OpenGL application and attempting to rotate the desktop may result in corruption being noticed. Further details can be found in topic number 737-29556

다운로드 : ATi.AMD.com 메인페이지의 드라이버 & 소프트웨어 페이지를 참고 하시기 바랍니다.

ATi Catalyst™ Crew Driver Feedback

출처 : https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/gamesite/Catalyst_712_Release_Notes.html

• Author Details

Author Details

Linus Lee

Linus Lee aka y1sh former ATiMania.com sysop during 2001-2012. DevSecOps Engineer who likes tech, science, programming and solving problems 🙂

https://andromedarabbit.net/author/linus-lee/

linus@andromedarabbit.net